Smart Infrastructure

Chowdhury, S., Adhikari, S. (2026) Advanced stiffened amplifier friction sliding isolators. Journal of Structural Design and Construction Practice, 31, (doi: 10.1061/JSDCCC.SCENG-1758)

Bhattacharyya, A., Adhikari, S. (2026) Bandgap manipulation through a bi-stable inertially amplified strongly nonlinear periodic chain. International Journal of Non-Linear Mechanics, 187, (doi: 10.1016/j.ijnonlinmec.2026.105364)

Chowdhury, S., Adhikari, S. (2026) Elastomagnetic amplifier friction dampers: analytical modelling and closed-form optimal design for superior vibration mitigation. Applied Mathematical Modelling, (doi: 10.1016/j.apm.2026.117044)

Aldellaa, I., Grassl, P. (2026) Rate dependence of corrosion-induced surface cracking in concrete: Lattice modelling and experiments. Frontiers in Materials,

Chen, Q., Gao, Z., Febrianto, E. (2026) A generative adversarial neural network for modelling state-dependent sand behaviour. Acta Geotechnica,

Abdelrhim, G., Grassl, P. (2026) A 3D frame element for large rotations based on the rigid-body–spring concept for analysing the failure of structures. International Journal of Solids and Structures, 327, (doi: 10.1016/j.ijsolstr.2025.113812)

Zheng, T., Buckley, R., Febrianto, E. (2026) A comprehensive approach for Bayesian soil classification using Cone Penetration Test data. Computers and Geotechnics, 190, (doi: 10.1016/j.compgeo.2025.107671)

Das, S., Kim, Y., Della, C., Shah, J. A. (2026) Educator-in-the-Loop: AI-Assisted LaTeX Workflows for Rapid Development of Technical Lecture Materials in Engineering Education. (doi: 10.1109/tale66047.2025.11346785)

Sheil, B., Anagnostopoulos, C., Buckley, R., Ciantia, M., Febrianto, E., Fu, J., Gao, Z., Geng, X., Gong, B., Hanley, K., He, P., Kolomvatsos, K., Lopes, B., Ninic, J., Previtali, M., Rezania, M., Ruiz-Lopez, A., Sun, J., Suryasentana, S., Taborda, D., Utili, S., Whyte, S., Zhang, P. (2026) Artificial intelligence transformations in geotechnics: progress, challenges and future enablers. Computers and Geotechnics, 189, (doi: 10.1016/j.compgeo.2025.107604)

Rosić, N., Cajić, M., Karličić, D., Adhikari, S., Lazarević, M. (2026) Enhanced wave attenuation through inertial amplification in periodic beam-rigid body structure. Applied Mathematical Modelling, 149, (doi: 10.1016/j.apm.2025.116273)

Breen, J., Mallik, W., Adhikari, S. (2025) Performance analysis and geometric optimization of bladeless wind turbines using wake oscillator model. Renewable Energy, 254, (doi: 10.1016/j.renene.2025.123549)

Chowdhury, S., Jacques, A., Adhikari, S. (2025) Advancing seismic isolation efficiency of rolling rod base isolators using nonlinear inertial amplifiers. Nonlinear Dynamics, 113, pp. 34563-34595. (doi: 10.1007/s11071-025-11857-y)

Jacques, A., Adhikari, S. (2025) Mode veering via inertial coupling. Journal of Sound and Vibration, 617, (doi: 10.1016/j.jsv.2025.119292)

Chowdhury, S., Debbarma, R., Adhikari, S. (2025) Tuned inerter viscoelastic liquid column dampers. Journal of Sound and Vibration, 617, (doi: 10.1016/j.jsv.2025.119319)

Zheng, T., Buckley, R., Febrianto, E. (2025) Erratum for “Automatic interpretation of downhole seismic geophysical data accounting for uncertainty and measurement error” Journal of Geotechnical and Geoenvironmental Engineering, 151, (doi: 10.1061/JGGEFK.GTENG-14501)

Chowdhury, S., Adhikari, S. (2025) Frictional energy harvesting vibration absorbers. Mechanics Research Communications, 149, (doi: 10.1016/j.mechrescom.2025.104539)

Chowdhury, S., Adhikari, S., Banerjee, A. (2025) Advanced energy harvesting vibration absorbers using inertial amplifiers. Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 11, (doi: 10.1061/ajrua6.rueng-1529)

Adhikari, S., Chowdhury, S. (2025) Geometric amplification of damping: novel mechanisms for enhanced vibration control. Structures, 79, (doi: 10.1016/j.istruc.2025.109364)

Adhikari, S., Chowdhury, S. (2025) Advanced vibration mitigation with novel stiffened inertial amplifier designs. Journal of Earthquake Engineering, (doi: 10.1080/13632469.2025.2530581)

Shah, J. A., Lim, L. H. I., Kim, Y., Das, S. (2025) Collaborative Project-Based Learning in Mechanical Design. (doi: 10.21125/edulearn.2025.0403)

Kim, Y., Shah, J. A., Peevers, G., McMaster, T. (2025) Empowering Faculty Through Leadership: a Collaborative Approach to Blended Learning Adoption in Higher Education. (doi: 10.21125/edulearn.2025.0461)

Jacquelin, E., Adhikari, S., Brizard, D. (2025) A comparative analysis of intrusive and non-intrusive PCE methods for random mode computation. Probabilistic Engineering Mechanics, 81, (doi: 10.1016/j.probengmech.2025.103792)

Chowdhury, S., Adhikari, S., Banerjee, A. (2025) Enhancing low-frequency vibration energy harvesting using negative stiffness inertial amplifiers. Renewable Energy, 247, (doi: 10.1016/j.renene.2025.123036)

Chowdhury, S., Adhikari, S., Banerjee, A. (2025) Robust control design of nonlinear negative stiffness base isolators for MDOF systems. International Journal of Non-Linear Mechanics, 174, (doi: 10.1016/j.ijnonlinmec.2025.105083)

Jiang, Y., Gao, P., Adhikari, S., Yao, X., Zhou, H., Liu, Y. (2025) Studies on the mechanical properties of interlayer interlocking 3D printed concrete based on a novel nozzle. Case Studies in Construction Materials, 22, (doi: 10.1016/j.cscm.2024.e04193)

Zheng, T., Buckley, R. M., Febrianto, E., Lowther, A., Stock, P., Rattley, M., Whyte, S. (2025) Advancing Offshore Site Characterization Practices Through Intelligent Data Utilisation. (doi: 10.53243/ISFOG2025-466)

Liu, X., Wang, Y., Adhikari, S., Zhou, W. (2025) Exact energy harvesting analysis of multimodal piezoelectric beams using the dynamic stiffness method. Computers and Structures, 313, pp. 107746. (doi: 10.1016/j.compstruc.2025.107746)

Chowdhury, S., Adhikari, S. (2025) Nonlinear damping amplifier friction bearings. Journal of Vibration and Acoustics, 147, (doi: 10.1115/1.4067800)

Chowdhury, S., Adhikari, S. (2025) Stiffened amplifier energy harvesting vibration absorbers. Smart Materials and Structures, 34, (doi: 10.1088/1361-665X/ade20f)

Zheng, T., Buckley, R., Febrianto, E. (2025) Automatic interpretation of downhole seismic geophysical data accounting for uncertainty and measurement error. Journal of Geotechnical and Geoenvironmental Engineering, 151, (doi: 10.1061/JGGEFK.GTENG-13491)

Patro, S. R., Banerjee, A., Adhikari, S., Ramana, G. V. (2025) Dynamics of monopile-supported offshore wind turbines under ship impact loading: a generalised frequency domain approach. Ships and Offshore Structures, pp. 1-27. (doi: 10.1080/17445302.2025.2506816)

Korec, E., Grassl, P., Jirásek, M., Wong, H. S., Martínez-Pañeda, E. (2025) RAAC panels can suddenly collapse before any warning of corrosion-induced surface cracking. npj Materials Degradation, 9, (doi: 10.1038/s41529-025-00596-5)

Chowdhury, S., Adhikari, S. (2025) Structural vibration control using nonlinear damping amplifier friction vibration absorbers. Applied Mathematics and Mechanics, 46, pp. 965-988. (doi: 10.1007/s10483-025-3248-7)

Aldellaa, I., Grassl, P. (2025) Effect of Water-cement Ratio and Current Density on Accelerated Corrosion Induced Cracking. (doi: 10.21012/FC12.1177)

Wang, M., Jiang, K., Shi, Y., Grassl, P., Liang, Y., Zhao, O. (2025) Experimental investigation and analysis of full-scale steel–recyclable aggregate concrete composite beams with bolted shear connectors. Engineering Structures, 328, (doi: 10.1016/j.engstruct.2025.119737)

Chowdhury, S., Adhikari, S. (2025) Nonlinear inertial amplifier liquid column dampers. Applied Mathematical Modelling, 140, (doi: 10.1016/j.apm.2024.115875)

Chowdhury, S., Adhikari, S. (2025) Nonlinear stiffened inertial amplifier tuned mass friction dampers. Soil Dynamics and Earthquake Engineering, 191, (doi: 10.1016/j.soildyn.2025.109264)

Daramola, A. M., Satyanaga, A., Alfrendo, B. D., Kim, Y., Qian, Z., Kim, J. (2025) Real-time scanning curve of soil-water characteristic curve for residual soil slope. Sustainability, 17, (doi: 10.3390/su17051803)

Kim, Y., Sim, T. E., Chua, Y. S., Bakytuly, N., Satyanaga, A., Pu, J. (2025) Green cover systems for slope stabilisation in Singapore. Land, 14, (doi: 10.3390/land14020436)

Jiang, Y., Zhang, Z., Cai, J., Leng, Y., Adhikari, S., He, Z. (2025) Uncertainty quantification of structural displacement based on multi-response surfaces method for a long-span concrete cable-stayed bridge with damages. Structure and Infrastructure Engineering, (doi: 10.1080/15732479.2025.2461635)

Kim, Y., Das, S., Shah, J. A., Lim, L. H. I., Yeo, C. (2025) Analysis of Project-Based Learning (PBL) Characteristics in Civil Engineering Education. (doi: 10.1109/tale62452.2024.10834330)

Guo, Z., Liu, X.., Huang, L., Adhikari, S., Liang, X. (2025) Corrigendum to “Analytical homogenization for equivalent in-plane elastic moduli of prestressed lattices based on the micropolar elasticity model” [Compos. Struct. 346 (2024) 118391] Composite Structures, 352, (doi: 10.1016/j.compstruct.2024.118645)

Das, S., Kim, Y., Shah, J. A., Lim, L. H. I. (2025) Enhancing Applied Learning in Civil Engineering: Implementing Project-Based Learning in Hydrological Studies. (doi: 10.1109/tale62452.2024.10834363)

Adhikari, S., Mukherjee, S. (2025) Homogenised In-Plane Elastic Properties of Randomly Irregular 2D Lattices. (doi: 10.2514/6.2025-0583)

Sriharan, J., Dias, M., Adhikari, S., Fernando, D. (2025) A semi-analytical model for predicting the shear buckling of laminated composite honeycomb cores in sandwich panels. Composite Structures, 351, (doi: 10.1016/j.compstruct.2024.118629)

Nešić, N., Karličić, D., Cajić, M., Simonović, J., Adhikari, S. (2025) Vibration suppression of a platform by a fractional type electromagnetic damper and inerter-based nonlinear energy sink. Applied Mathematical Modelling, 137, (doi: 10.1016/j.apm.2024.115651)

Panda, S., Banerjee, A., Baxy, A., Manna, B., Adhikari, S. (2025) Artificial neural network-based multiple-input multiple-output metamodel for prediction of design parameters for a high-speed rail viaduct. Structure and Infrastructure Engineering, 21, pp. 70-88. (doi: 10.1080/15732479.2023.2188599)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) From impact to control: inertially amplified friction bearings. ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10, (doi: 10.1061/ajrua6.rueng-1407)

Chua, Y. S., Kim, Y., Li, M., Aventian, G. D., Satyanaga, A. (2024) A survey of advanced materials and technologies for energy harvesting from roadways. Electronics, 13, (doi: 10.3390/electronics13244946)

Wiragunarsa, I.M., Zuhal, L.R., Dirgantara, T., Putra, I.S., Febrianto, E. (2024) Total Lagrangian smoothed particle hydrodynamics with an improved bond-based deformation gradient for large strain solid dynamics. Journal of Computational Physics, 518, (doi: 10.1016/j.jcp.2024.113309)

Adhikari, S., Chowdhury, S. (2024) Enhanced Q-factor in microcantilevers using stiffened inertial amplifiers. Journal of Applied Physics, 136, (doi: 10.1063/5.0237524)

Peevers, G., McMaster, T., Bhardwaj, N., Shah, J. A., Keoh, S. L., Goh, C. S., Kim, Y. (2024) Supporting a Mindset Shift to Blended Learning at the University of Glasgow Singapore.

Orazayeva, S., Satyanaga, A., Kim, Y., Rahardjo, H., Qian, Z., Moon, S.-W., Kim, J. (2024) Advanced scanning technology for volume change measurement of residual soil. Applied Sciences, 14, (doi: 10.3390/app142310938)

Banerjee, A., Bera, K. K., Adhikari, S. (2024) Enhanced damping and bandwidth in roton-like dispersion of a beyond nearest neighbor periodic chain. Physics Letters A, 524, (doi: 10.1016/j.physleta.2024.129821)

Patrick, I., Adhikari, S., Hussein, M. I. (2024) Metaharvesting: emergent energy harvesting by piezoelectric metamaterials. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 480, (doi: 10.1098/rspa.2024.0033)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The nonlinear negative stiffness inertial amplifier base isolators for dynamic systems. Mechanics Based Design of Structures and Machines, 52, pp. 8430-8469. (doi: 10.1080/15397734.2024.2319113)

Guo, Z., Liu, X., Huang, L., Adhikari, S., Liang, X. (2024) Analytical homogenization for equivalent in-plane elastic moduli of prestressed lattices based on the micropolar elasticity model. Composite Structures, 346, (doi: 10.1016/j.compstruct.2024.118391)

Liu, X., Liu, X., Adhikari, S. (2024) Exact dynamic stiffness formulations and vibration response analysis of orthotropic viscoelastic plate built-up structures. Computers and Structures, 302, (doi: 10.1016/j.compstruc.2024.107455)

Mukherjee, S., Maeder, M., Cajić, M., Kronowetter, F., Adhikari, S., Marburg, S. (2024) Tailoring band gap properties of curved hexagonal lattices with nodal cantilevers. Composite Structures, 345, (doi: 10.1016/j.compstruct.2024.118342)

Roy, A., Chatterjee, T., Adhikari, S. (2024) A physics-informed neural network enhanced importance sampling (PINN-IS) for data-free reliability analysis. Probabilistic Engineering Mechanics, 78, (doi: 10.1016/j.probengmech.2024.103701)

Kattimani, R.S., Malaji, P.V., Chappar, S.S., Adhikari, S. (2024) Enhanced vibration energy harvesting from coupled pendulums through inertial amplifiers. Smart Materials and Structures, 33, (doi: 10.1088/1361-665X/ad77ff)

Roy, A., Chakraborty, S., Adhikari, S. (2024) Seismic reliability analysis of nonlinear structures by active learning-based adaptive sparse Bayesian regressions. International Journal of Non-Linear Mechanics, 165, (doi: 10.1016/j.ijnonlinmec.2024.104817)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The optimal nonlinear inertial amplifier friction bearings for liquid storage tanks: an analytical study. International Journal of Dynamics and Control, 12, pp. 3565-3576. (doi: 10.1007/s40435-024-01462-z)

Alfarisy, D., Zuhal, L., Ortiz, M., Cirak, F., Febrianto, E. (2024) Point collocation with mollified piecewise polynomial approximants for high-order partial differential equations. International Journal for Numerical Methods in Engineering, 125, (doi: 10.1002/nme.7548)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) Enhancing seismic resilience of structures through optimally designed nonlinear negative stiffness base isolators: Exact closed-form expressions. Nonlinear Dynamics, 112, pp. 15833-15856. (doi: 10.1007/s11071-024-09892-2)

Rosić, N., Karličić, D., Cajić, M., Adhikari, S., Lazarević, M. (2024) Wave propagation in tailored metastructures consisting of elastic beams and rigid bodies. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 382, (doi: 10.1098/rsta.2023.0362)

Zhou, C., Marlot, A., Grassl, P. (2024) CDPM2F: a damage-plasticity approach for modelling the failure of strain hardening cementitious composites. Engineering Fracture Mechanics, 308, (doi: 10.1016/j.engfracmech.2024.110325)

Peevers, G., McMaster, T., Bhardwaj, N., Shah, J. A., Keoh, S. L., Goh, C. S., Kim, Y. (2024) A Collaborative Journey: Redesigning University of Glasgow Singapore’s Programmes for Blended Delivery.

Subramanian, S. K., Joshi, V., Kalra, S., Adhikari, S. (2024) Unveiling the fatigue life of NiTi endodontic files: an integrated computational-experimental study. Journal of the Mechanical Behavior of Biomedical Materials, 157, (doi: 10.1016/j.jmbbm.2024.106657)

Kim, Y., Das, S., Shah, J. A., Lim, L. H. I. (2024) Design of Project-Based Learning (PBL) in civil engineering. International Journal of Learning and Teaching, 10, pp. 539-543. (doi: 10.18178/ijlt.10.4.539-543)

Chatterjee, T., Friswell, M. I., Adhikari, S., Khodaparast, H. H. (2024) MATLAB implementation of physics informed deep neural networks for forward and inverse structural vibration problems. Aerospace Research Communications, 2, (doi: 10.3389/arc.2024.13194)

Febrianto, E., Šístek, J., Kůs, P., Kecman, M., Cirak, F. (2024) A three-grid high-order immersed finite element method for the analysis of CAD models. Computer-Aided Design, 173, (doi: 10.1016/j.cad.2024.103730)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The optimum inerter-based additional viscoelastic mass dampers for dynamic response mitigation of structures. Mechanics Based Design of Structures and Machines, 52, pp. 3775-3798. (doi: 10.1080/15397734.2023.2209460)

Zheng, T., Buckley, R., Febrianto, E. (2024) Development of a Framework for Automatic Quantification of Uncertainty in Seismic Cone Penetration Testing.

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) Enhancing seismic resilience of nonlinear structures through optimally designed additional mass dampers. International Journal of Non-Linear Mechanics, 162, (doi: 10.1016/j.ijnonlinmec.2024.104717)

Cajić, M., Karličić, D., Adhikari, S. (2024) Inerter-controlled topological interface states in locally resonant lattices with beyond-nearest neighbor coupling. Journal of Applied Physics, 135, (doi: 10.1063/5.0205248)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) A critical review on inertially-amplified passive vibration control devices. Archives of Computational Methods in Engineering, 31, pp. 2139-2175. (doi: 10.1007/s11831-023-10040-z)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The exact closed-form expressions for optimum inertial amplifier coupled nonlinear friction bearing isolators. Springer

Gupta, V., Adhikari, S., Bhattacharya, B. (2024) Evidence of nonlinearity tailoring in static and dynamic responses of honeycomb and auxetic hourglass lattice metastructures. Mechanics Research Communications, 137, (doi: 10.1016/j.mechrescom.2024.104261)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The optimum enhanced viscoelastic tuned mass dampers: exact closed-form expressions. Journal of Vibration and Control, 30, pp. 1080-1102. (doi: 10.1177/10775463231156240)

Achillopoulou, D. V., Kosta, A., Stamataki, N. K., Montalbano, A., Choffat, F. (2024) Efficiency of CFRP strengthening measures for reinforced concrete structural members using toughened epoxies. Construction Materials, 4, pp. 173-193. (doi: 10.3390/constrmater4010010)

Yu, B., Zhang, D., Wu, X., Adhikari, S., Lei, Y. (2024) Optimal design of a clamp band system based on genetic algorithm and experimental verification. Aerospace Science and Technology, 145, (doi: 10.1016/j.ast.2024.108870)

Sriharan, J., Dias, M., Fernando, D., Adhikari, S. (2024) A unified approach for the prediction of the effective properties of laminated composite cellular core. Engineering Structures, 299, (doi: 10.1016/j.engstruct.2023.117106)

Dwivedi, A., Munian, R. K., Bhattacharya, B., Adhikari, S. (2024) Bandgap formation mechanism in tacticity inspired elastic mechanical metastructures. Scientific Reports, 14, (doi: 10.1038/s41598-024-75462-6)

Kim, Y., Idris, L. L. H., Das, S., Yau, P. C. (2024) Development Of Project-Based Learning In Civil Engineering. (doi: 10.21125/inted.2024.1558)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) Nonlinear inertial amplifier resilient friction base isolators for multiple degrees of freedom systems. Mechanics of Advanced Materials and Structures, 31, pp. 8299-8306. (doi: 10.1080/15376494.2023.2257433)

Sun, F., Febrianto, E., Fernando, H., Butler, L. J., Cirak, F., Hoult, N. A. (2023) Data-informed statistical finite element analysis of rail buckling. Computers and Structures, 289, (doi: 10.1016/j.compstruc.2023.107163)

Makhoul, N., Achillopoulou, D. V., Stamataki, N. K., Kromanis, R. (2023) Adaptive pathways using emerging technologies: Applications for critical transportation infrastructure. Sustainability, 15, (doi: 10.3390/su152316154)

Malaji, P. V., Friswell, M. I., Adhikari, S., Litak, G. (2023) High-energy orbit harvesting with torsionally coupled mistuned pendulums. Journal of Vibration Engineering and Technologies, 11, pp. 4223-4240. (doi: 10.1007/s42417-022-00811-6)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimal design of negative stiffness inerter passive dampers for structures. International Journal of Mechanical Sciences, 258, (doi: 10.1016/j.ijmecsci.2023.108551)

Mirani, H., Gupta, V., Adhikari, S., Bhattacharya, B. (2023) Tailoring of interface modes in topologically protected edge states with hourglass lattice metamaterials. Journal of Sound and Vibration, 562, (doi: 10.1016/j.jsv.2023.117814)

Mukhopadhyay, T., Naskar, S., Kundu, D., Adhikari, S. (2023) Effective elastic moduli of space-filled multi-material composite lattices. Composites Communications, 42, (doi: 10.1016/j.coco.2023.101656)

Desai, A. S., N., N., Adhikari, S., Chakraborty, S. (2023) Enhanced multi-fidelity modeling for digital twin and uncertainty quantification. Probabilistic Engineering Mechanics, 74, (doi: 10.1016/j.probengmech.2023.103525)

Kim, J., Kim, Y., Satyanaga, A. (2023) Stability analysis for levee overflow failure due to water level fluctuation. Water, 15, (doi: 10.3390/w15193402)

Yuan, P., Adhikari, S., Dong, Y. (2023) A partitioned combined computational method for multi‐scale dynamic systems. International Journal for Numerical Methods in Engineering, 124, pp. 3494-3523. (doi: 10.1002/nme.7256)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimum inertial amplifier viscoelastic base isolators for dynamic response mitigation of structures: an analytical study. Journal of Structural Integrity and Maintenance, 8, pp. 150-160. (doi: 10.1080/24705314.2023.2176619)

Smith, M. G., Radford, J., Febrianto, E., Ramírez, J., O'Mahony, H., Matheson, A. B., Gibson, G. M., Faccio, D., Tassieri, M. (2023) Machine learning opens a doorway for microrheology with optical tweezers in living systems. AIP Advances, 13, (doi: 10.1063/5.0161014)

Chatterjee, T., Karličić, D., Cajić, M., Adhikari, S., Friswell, M. I. (2023) Uncertainty quantification in inerter-based quasiperiodic lattices. International Journal of Mechanical Sciences, 249, (doi: 10.1016/j.ijmecsci.2023.108258)

Patro, S. R., Banerjee, A., Adhikari, S., Ramana, G. V. (2023) Kaimal spectrum based H2 optimization of tuned mass dampers for wind turbines. Journal of Vibration and Control, 29, pp. 3175-3185. (doi: 10.1177/10775463221092838)

Nešić, N., Cajić, M., Karličić, D., Lazarević, M., Adhikari, S. (2023) Vibration and stability of a nonlinear nonlocal strain-gradient FG beam on a visco-Pasternak foundation. Facta Universitatis, Series: Mechanical Engineering, (doi: 10.22190/FUME230419022N)

Mukherjee, S., Adhikari, S. (2023) The mechanics and optimal design of micro-architectured stepped hexagonal lattices. Composite Structures, 313, (doi: 10.1016/j.compstruct.2023.116900)

Thomoglou, A. K., Karabini, M. A., Achillopoulou, D. V., Rousakis, T. C., Chalioris, C. E. (2023) Failure mode prediction of unreinforced masonry (URM) walls retrofitted with cementitious textile reinforced mortar (TRM) Fibers, 11, (doi: 10.3390/fib11060053)

Tripura, T., Desai, A. S., Adhikari, S., Chakraborty, S. (2023) Probabilistic machine learning based predictive and interpretable digital twin for dynamical systems. Computers and Structures, 281, (doi: 10.1016/j.compstruc.2023.107008)

Arora, V., Adhikari, S., Vijayan, K. (2023) FRF-based finite element model updating for non-viscous and non-proportionally damped systems. Journal of Sound and Vibration, 552, (doi: 10.1016/j.jsv.2023.117639)

Yau, P. C., Kim, Y., Wong, D., Pang, P., Kan, S., Cao, Q. (2023) What Students Want to Have in the Post-Pandemic?: A Study about Computing Science Study Preferences and Mode of Study in Southeast Asia. (doi: 10.1145/3582580.3582591)

Karličić, D., Cajić, M., Paunović, S., Obradović, A., Adhikari, S., Christensen, J. (2023) Non-reciprocal wave propagation in time-modulated elastic lattices with inerters. Applied Mathematical Modelling, 117, pp. 316-335. (doi: 10.1016/j.apm.2022.12.029)

Roy, A., Chakraborty, S., Adhikari, S. (2023) Reliability analysis of structures by active learning enhanced sparse Bayesian regression. Journal of Engineering Mechanics, 149, (doi: 10.1061/jenmdt.emeng-6964)

Ganguli, R., Adhikari, S., Chakraborty, S., Ganguli, M. (2023) Digital Twin: A Dynamic System and Computing Perspective. CRC Press

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimal configuration of negative stiffness inerter-based base isolators in multi-storey buildings. Structures, 50, pp. 1232-1251. (doi: 10.1016/j.istruc.2023.02.095)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) Optimal design of inertial amplifier base isolators for dynamic response control of multi-storey buildings. International Journal of Structural Stability and Dynamics, 23, (doi: 10.1142/s0219455423500475)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimum inertial amplifier tuned mass dampers for nonlinear dynamic systems. International Journal of Applied Mechanics, 15, (doi: 10.1142/s1758825123500096)

Mukherjee, S., Cajić, M., Karličić, D., Adhikari, S. (2023) Enhancement of band-gap characteristics in hexagonal and re-entrant lattices via curved beams. Composite Structures, 306, (doi: 10.1016/j.compstruct.2022.116591)

Grassl, P. (2023) 3D lattice meso-scale modelling of the effect of lateral compression on tensile fracture processes in concrete. International Journal of Solids and Structures, 262-63, (doi: 10.1016/j.ijsolstr.2022.112086)

Bhattacharyya, A., Adhikari, S. (2023) Propagation characteristics of an elastic bar coupled with a discrete snap-through element. Nonlinear Dynamics, 111, pp. 2961-2990. (doi: 10.1007/s11071-022-08028-8)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimal design of dynamic systems with negative stiffness inertial amplifier tuned mass dampers. Applied Mathematical Modelling, 114, pp. 694-721. (doi: 10.1016/j.apm.2022.10.011)

Cajić, M., Karličić, D., Christensen, J., Adhikari, S. (2023) Tunable topological interface states in one-dimensional inerter-based locally resonant lattices with damping. Journal of Sound and Vibration, 542, (doi: 10.1016/j.jsv.2022.117326)

Bhatt, A., Banerjee, A., Adhikari, S. (2022) Closed-form solutions for attenuation peaks and band boundaries of general monocoupled systems. Journal of Sound and Vibration, 541, (doi: 10.1016/j.jsv.2022.117318)

Chandra, Y., Adhikari, S., Mukherjee, S., Mukhopadhyay, T. (2022) Unfolding the mechanical properties of buckypaper composites: nano- to macro-scale coupled atomistic-continuum simulations. Engineering with Computers, 38, pp. 5199-5229. (doi: 10.1007/s00366-021-01538-w)

Liu, X., Huang, L., Adhikari, S. (2022) Equivalent in-plane dynamic elastic moduli of lattice structures with Plateau borders. Composite Structures, 299, (doi: 10.1016/j.compstruct.2022.116056)

Febrianto, E., Butler, L., Girolami, M., Cirak, F. (2022) Digital twinning of self-sensing structures using the statistical finite element method. Data-Centric Engineering, 3, (doi: 10.1017/dce.2022.28)

Sia, V., Satyanaga, A., Kim, Y. (2022) Effects of heavy rainfall on shallow foundations in Bukit Timah Granite in Singapore. Applied Sciences, 12, (doi: 10.3390/app12199516)

Liu, X., Liu, X., Adhikari, S., Zhao, X. (2022) An analytical framework for broadband dynamic analysis of plate built-up structures with uncertain viscoelastic boundary or connection conditions. Mechanical Systems and Signal Processing, 177, (doi: 10.1016/j.ymssp.2022.109121)

Hamdany, A. H., Satyanaga, A., Zhang, D., Kim, Y., Kim, J. R. (2022) Photocatalytic cementitious material for eco-efficient construction—a systematic literature review. Applied Sciences, 12, (doi: 10.3390/app12178741)

Hussein, M. I., Patrick, I., Banerjee, A., Adhikari, S. (2022) Metadamping in inertially amplified metamaterials: Trade-off between spatial attenuation and temporal attenuation. Journal of Sound and Vibration, 531, (doi: 10.1016/j.jsv.2022.116977)

Liu, X., Lu, Z., Adhikari, S., Li, Y., Banerjee, J. R. (2022) Exact wave propagation analysis of lattice structures based on the dynamic stiffness method and the Wittrick–Williams algorithm. Mechanical Systems and Signal Processing, 174, (doi: 10.1016/j.ymssp.2022.109044)

Satyanaga, A., Rangarajan, S., Rahardjo, H., Li, Y., Kim, Y. (2022) Soil database for development of soil properties envelope. Engineering Geology, 304, (doi: 10.1016/J.ENGGEO.2022.106698)

Singh, S. K., Banerjee, A., Varma, R. K., Adhikari, S., Das, S. (2022) Static and dynamic analysis of homogeneous Micropolar-Cosserat panels. Mechanics of Advanced Materials and Structures, 29, pp. 2757-2768. (doi: 10.1080/15376494.2021.1877377)

Adhikari, S., Mukherjee, S. (2022) The exact element stiffness matrices of stochastically parametered beams. Probabilistic Engineering Mechanics, 69, (doi: 10.1016/j.probengmech.2022.103317)

Karličić, D., Cajić, M., Paunović, S., Adhikari, S. (2022) Uni-Directional Wave Propagation in Time-Modulated Inerter-Based Lattice.

Dwivedi, A., Banerjee, A., Adhikari, S., Bhattacharya, B. (2022) Bandgap merging with double-negative metabeam. Mechanics Research Communications, 122, (doi: 10.1016/j.mechrescom.2022.103889)

Mihai, I. C., Bains, A., Grassl, P. (2022) Modelling of Cracking Mechanisms in Cementitious Materials: The Transition from Diffuse Microcracking to Localized Macrocracking. (doi: 10.1201/9781003316404-26)

Liu, X., Lee, C.H., Grassl, P. (2022) On the Modelling of the Rate Dependence of Strength Using a Crack-band Based Damage Model for Concrete. CRC Press

Mirani, H., Gupta, V., Adhikari, S., Bhattacharya, B. (2022) Interface Modes in Topologically Protected Edge States Using Hourglass Based Metastructures. (doi: 10.1117/12.2630931)

Aldellaa, I., Havlásek, P., Jirásek, M., Grassl, P. (2022) Effect of creep on corrosion-induced cracking. Engineering Fracture Mechanics, 264, (doi: 10.1016/j.engfracmech.2022.108310)

Povala, J., Kazlauskaite, I., Febrianto, E., Cirak, F., Girolami, M. (2022) Variational Bayesian approximation of inverse problems using sparse precision matrices. Computer Methods in Applied Mechanics and Engineering, 393, (doi: 10.1016/j.cma.2022.114712)

Adhikari, S., Banerjee, A. (2022) Enhanced low-frequency vibration energy harvesting with inertial amplifiers. Journal of Intelligent Material Systems and Structures, 33, pp. 822-838. (doi: 10.1177/1045389X211032281)

Liu, X., Lee, C. H., Grassl, P. (2022) On the Modelling of Spalling in Plain Concrete.

Abdelrhim, G., Grassl, P. (2022) Modelling the Failure of Steel Reinforced Concrete Frame Structures.

Liu, X., Liu, X., Adhikari, S., Yin, S. (2022) Extended Wittrick–Williams algorithm for eigenvalue solution of stochastic dynamic stiffness method. Mechanical Systems and Signal Processing, 166, (doi: 10.1016/j.ymssp.2021.108354)

Chowdhury, S., Banerjee, A., Adhikari, S. (2022) Optimal negative stiffness inertial-amplifier-base-isolators: Exact closed-form expressions. International Journal of Mechanical Sciences, 218, (doi: 10.1016/j.ijmecsci.2021.107044)

Larsen, M. L., Arora, V., Adhikari, S., Clausen, H. B. (2022) Optimization of welded K-node in offshore jacket structure including the stochastic size effect. Marine Structures, 82, (doi: 10.1016/j.marstruc.2021.103128)

Adhikari, S., Chakraborty, S. (2022) Random matrix eigenvalue problems in structural dynamics: An iterative approach. Mechanical Systems and Signal Processing, 164, (doi: 10.1016/j.ymssp.2021.108260)

Singh, A., Mukhopadhyay, T., Adhikari, S., Bhattacharya, B. (2022) Active multi-physical modulation of Poisson’s ratios in composite piezoelectric lattices: on-demand sign reversal. Composite Structures, 280, (doi: 10.1016/j.compstruct.2021.114857)

Mukherjee, S., Adhikari, S. (2022) The in-plane mechanics of a family of curved 2D lattices. Composite Structures, 280, (doi: 10.1016/j.compstruct.2021.114859)

Kim, Y., Rahardjo, H., Nistor, M. M., Satyanaga, A., Leong, E.-C., Sham, A. W. L. (2022) Assessment of critical rainfall scenarios for slope stability analyses based on historical rainfall records in Singapore. Environmental Earth Sciences, 81, (doi: 10.1007/s12665-021-10160-4)

Zhou, C., Grassl, P. (2022) A Damage-plasticity Approach for Modeling the Failure of Engineered Cementitious Composites.

Singh, A., Mukhopadhyay, T., Adhikari, S., Bhattacharya, B. (2022) Extreme on-demand contactless modulation of elastic properties in magnetostrictive lattices. Smart Materials and Structures, 31, (doi: 10.1088/1361-665x/ac9cac)

Aldellaa, I., Grassl, P. (2022) On Corrosion-induced Cracking in Reinforced Concrete with Different Corrosion Rates.

Ekop, I., Grassl, P. (2022) On Finite Element Modelling of Concrete Columns with Non-circular Cross-sections Confined with Carbon Fibre Reinforced Polymer.

Løvenskjold Larsen, M., Adhikari, S., Arora, V. (2021) Analysis of stochastically parameterized prestressed beams and frames. Engineering Structures, 249, (doi: 10.1016/j.engstruct.2021.113312)

Kim, S. Y., Na, W., Jun, C., Seo, H., Kim, Y. (2021) Hydrological performance of green roof systems: a numerical investigation. Frontiers in Environmental Science, 9, (doi: 10.3389/fenvs.2021.806697)

Pryse, S. E., Adhikari, S. (2021) Neumann enriched polynomial chaos approach for stochastic finite element problems. Probabilistic Engineering Mechanics, 66, (doi: 10.1016/j.probengmech.2021.103157)

Lakshminarayana, S., Adhikari, S., Maple, C. (2021) Analysis of IoT-based load altering attacks against power grids using the theory of second-order dynamical systems. IEEE Transactions on Smart Grid, 12, pp. 4415-4425. (doi: 10.1109/TSG.2021.3070313)

Kim, Y., Satyanaga, A., Rahardjo, H., Park, H., Sham, A. W. L. (2021) Estimation of effective cohesion using artificial neural networks based on index soil properties: a Singapore case. Engineering Geology, 289, (doi: 10.1016/j.enggeo.2021.106163)

Patrick, J., Adhikari, S., Hussein, M. I. (2021) Brillouin-zone characterization of piezoelectric material intrinsic energy-harvesting availability. Smart Materials and Structures, 30, (doi: 10.1088/1361-665X/ac0c2c)

Adhikari, S. (2021) The eigenbuckling analysis of hexagonal lattices: closed-form solutions. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 477, (doi: 10.1098/rspa.2021.0244)

Dwivedi, A., Banerjee, A., Adhikari, S., Bhattacharya, B. (2021) Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials. International Journal of Mechanics and Materials in Design, 17, pp. 419-439. (doi: 10.1007/s10999-021-09534-0)

Kim, Y., Rahardjo, H., Tsen-Tieng, D. L. (2021) Mechanical behavior of trees with structural defects under lateral load: a numerical modeling approach. Urban Forestry and Urban Greening, 59, (doi: 10.1016/j.ufug.2021.126987)

Girolami, M., Febrianto, E., Yin, G., Cirak, F. (2021) The statistical finite element method (statFEM) for coherent synthesis of observation data and model predictions. Computer Methods in Applied Mechanics and Engineering, 375, (doi: 10.1016/j.cma.2020.113533)

Chatterjee, T., Karličić, D., Adhikari, S., Friswell, M. I. (2021) Gaussian process assisted stochastic dynamic analysis with applications to near-periodic structures. Mechanical Systems and Signal Processing, 149, (doi: 10.1016/j.ymssp.2020.107218)

Febrianto, E., Ortiz, M., Cirak, F. (2021) Mollified finite element approximants of arbitrary order and smoothness. Computer Methods in Applied Mechanics and Engineering, 373, (doi: 10.1016/j.cma.2020.113513)

Satyanaga, A., Kim, Y., Hamdany, A. H., Nistor, M.-M., Sham, A. W. L., Rahardjo, H. (2021) Preventive measures for rainfall-induced slope failures in Singapore. Elsevier

Karličić, D., Chatterjee, T., Cajić, M., Adhikari, S. (2020) Parametrically amplified Mathieu-Duffing nonlinear energy harvesters. Journal of Sound and Vibration, 488, (doi: 10.1016/j.jsv.2020.115677)

Karličić, D., Cajić, M., Paunović, S., Adhikari, S. (2020) Nonlinear energy harvester with coupled Duffing oscillators. Communications in Nonlinear Science and Numerical Simulation, 91, (doi: 10.1016/j.cnsns.2020.105394)

Leppänen, J., Johansson, M., Grassl, P. (2020) On the dynamic response of reinforced concrete beams subjected to drop weight impact. Finite Elements in Analysis and Design, 180, (doi: 10.1016/j.finel.2020.103438)

Sciegaj, A., Grassl, P., Larsson, F., Runesson, K., Lundgren, K. (2020) Upscaling of three-dimensional reinforced concrete representative volume elements to effective beam and plate models. International Journal of Solids and Structures, 202, pp. 835-853. (doi: 10.1016/j.ijsolstr.2020.07.006)

Malaji, P. V., Friswell, M. I., Adhikari, S., Litak, G. (2020) Enhancement of harvesting capability of coupled nonlinear energy harvesters through high energy orbits. AIP Advances, 10, (doi: 10.1063/5.0014426)

Bhaskar, J., Kumar Sharma, A., Bhattacharya, B., Adhikari, S. (2020) A review on shape memory alloy reinforced polymer composite materials and structures. Smart Materials and Structures, 29, (doi: 10.1088/1361-665X/ab8836)

Chandra, Y., Saavedra Flores, E.I., Adhikari, S. (2020) Buckling of 2D nano hetero-structures with moire patterns. Computational Materials Science, 177, (doi: 10.1016/j.commatsci.2019.109507)

Chandra, Y., Adhikari, S., Saavedra Flores, E.I., Figiel, L. (2020) Advances in finite element modelling of graphene and associated nanostructures. Materials Science and Engineering R: Reports, 140, (doi: 10.1016/j.mser.2020.100544)

Rahardjo, H., Kim, Y., Gofar, N., Satyanaga, A. (2020) Analyses and design of steep slope with GeoBarrier system (GBS) under heavy rainfall. Geotextiles and Geomembranes, (doi: 10.1016/j.geotexmem.2019.11.010)

Kim, Y., Rahardjo, H., Thang, N. C. (2020) Elastoplastic behavior of compacted kaolin under consolidated drained and shearing infiltration conditions. Geotechnical Testing Journal, 43, pp. 414-435. (doi: 10.1520/gtj20180218)

Kim, Y., Rahardjo, H., Tsen-Tieng, D. L. (2020) Stability analysis of laterally loaded trees based on tree-root-soil interaction. Urban Forestry and Urban Greening, 49, (doi: 10.1016/j.ufug.2020.126639)

Adhikari, S., Rastogi, A., Bhattacharya, B. (2020) Piezoelectric vortex induced vibration energy harvesting in a random flow field. Smart Materials and Structures, 29, (doi: 10.1088/1361-665X/ab519f)

Chandra, Y., Mukhopadhyay, T., Adhikari, S., Figiel, Ł. (2020) Size-dependent dynamic characteristics of graphene based multi-layer nano hetero-structures. Nanotechnology, 31, (doi: 10.1088/1361-6528/ab6231)

Ganguli, R., Adhikari, S. (2020) The digital twin of discrete dynamic systems: Initial approaches and future challenges. Applied Mathematical Modelling, 77, pp. 1110-1128. (doi: 10.1016/j.apm.2019.09.036)

Jacquelin, E., Brizard, D., Adhikari, S., Friswell, M.I. (2020) Time-domain response of damped stochastic multiple-degree-of-freedom systems. Journal of Engineering Mechanics, 146, (doi: 10.1061/(ASCE)EM.1943-7889.0001705)

Adhikari, S., Bhattacharjee, B., Bhattacharjee, J. (2020) Preface. Lecture Notes in Civil Engineering, 38, pp. v-vi.

Kim, Y., Lim, H., Jeong, S. (2020) Seismic response of vertical shafts in multi-layered soil using dynamic and pseudo-static analyses. Geomechanics and Engineering, 21, pp. 269-277. (doi: 10.12989/GAE.2020.21.3.269)

Kim, Y., Rahardjo, H., Satyanaga, A. (2019) Susceptibility assessment of slope failures in Singapore using GIS-based prediction models. Springer

Lee, K., Kim, Y., Ko, J., Jeong, S. (2019) A study on the debris flow-induced impact force on check dam with- and without-entrainment. Computers and Geotechnics, 113, (doi: 10.1016/j.compgeo.2019.103104)

Grassl, P., Middlemiss, J. (2019) Finite Element Modelling of Tensile Reinforcement Laps in Steel Fibre Reinforced Concrete. (doi: 10.1201/9780429426506-110)

Martinez-Ayuso, G., Friswell, M.I., Haddad Khodaparast, H., Adhikari, S. (2019) Experimental validation of an impact off-resonance energy harvester. European Physical Journal: Special Topics, 228, pp. 1635-1646. (doi: 10.1140/epjst/e2019-800155-0)

Duncheva, T., Bradley, F. F. (2019) Multifaceted productivity comparison of off-site timber manufacturing strategies in mainland Europe and the United Kingdom. Journal of Construction Engineering and Management, 145, (doi: 10.1061/(ASCE)CO.1943-7862.0001641)

Grassl, P., Jirásek, M., Gallipoli, D. (2019) Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere. European Journal of Mechanics - A/Solids, 76, pp. 123-134. (doi: 10.1016/j.euromechsol.2019.04.004)

Rahardjo, H., Kim, Y., Satyanaga, A. (2019) Role of unsaturated soil mechanics in geotechnical engineering. International Journal of Geo-Engineering, 10, (doi: 10.1186/s40703-019-0104-8)

Batou, A., Adhikari, S. (2019) Optimal parameters of viscoelastic tuned-mass dampers. Journal of Sound and Vibration, 445, pp. 17-28. (doi: 10.1016/j.jsv.2019.01.010)

Grassl, P. (2019) On the Influence of Fibres on Tensile Laps of Reinforcement Loops.

Mukhopadhyay, T., Adhikari, S., Alu, A. (2019) Theoretical limits for negative elastic moduli in subacoustic lattice materials. Physical Review B, 99, (doi: 10.1103/PhysRevB.99.094108)

Scarth, C., Adhikari, S., Cabral, P.H., Silva, G.H.C., Prado, A.P.D. (2019) Random field simulation over curved surfaces: applications to computational structural mechanics. Computer Methods in Applied Mechanics and Engineering, 345, pp. 283-301. (doi: 10.1016/j.cma.2018.10.026)

Mukhopadhyay, T., Adhikari, S., Alu, A. (2019) Probing the frequency-dependent elastic moduli of lattice materials. Acta Materialia, 165, pp. 654-665. (doi: 10.1016/j.actamat.2018.11.012)

Dove, C. A., Bradley, F. F., Patwardhan, S. V. (2019) A material characterization and embodied energy study of novel clay-alginate composite aerogels. Energy and Buildings, 184, pp. 88-98. (doi: 10.1016/j.enbuild.2018.10.045)

Dey, S., Mukhopadhyay, T., Naskar, S., Dey, T.K., Chalak, H.D., Adhikari, S. (2019) Probabilistic characterisation for dynamics and stability of laminated soft core sandwich plates. Journal of Sandwich Structures and Materials, 21, pp. 366-397. (doi: 10.1177/1099636217694229)

Grassl, P., Antonelli, A. (2019) 3D network modelling of fracture processes in fibre-reinforced geomaterials. International Journal of Solids and Structures, 156-57, pp. 234-242. (doi: 10.1016/j.ijsolstr.2018.08.019)

Mukhopadhyay, T., Adhikari, S., Batou, A. (2019) Frequency domain homogenization for the viscoelastic properties of spatially correlated quasi-periodic lattices. International Journal of Mechanical Sciences, 150, pp. 784-806. (doi: 10.1016/j.ijmecsci.2017.09.004)

Grassl, P. (2019) Modelling the Dynamic Response of Concrete with the Damage Plasticity Model CDPM2.

Sciegaj, A., Grassl, P., Larsson, F., Lundgren, K., Runesson, K. (2019) On Periodic Boundary Conditions in Variationally Consistent Homogenisation of Beams and Plates.

Kim, J., Hwang, W., Kim, Y. (2018) Effects of hysteresis on hydro-mechanical behavior of unsaturated soil. Engineering Geology, 245, pp. 1-9. (doi: 10.1016/j.enggeo.2018.08.004)

Pryse, S.E., Adhikari, S., Kundu, A. (2018) Sample-based and sample-aggregated based Galerkin projection schemes for structural dynamics. Probabilistic Engineering Mechanics, 54, pp. 118-130. (doi: 10.1016/j.probengmech.2017.09.002)

Rahardjo, J., Kim, Y., Gofar, N., Leong, E. C., Wang, C. L., Wong, J. L.H. (2018) Field instrumentations and monitoring of GeoBarrier System for steep slope protection. Transportation Geotechnics, 16, pp. 29-42. (doi: 10.1016/j.trgeo.2018.06.006)

Gallipoli, D., Grassl, P., Wheeler, S., Gens, A. (2018) On the choice of stress–strain variables for unsaturated soils and its effect on plastic flow. Geomechanics for Energy and the Environment, 15, pp. 3-9. (doi: 10.1016/j.gete.2018.02.002)

Pryse, S.E., Kundu, A., Adhikari, S. (2018) Projection methods for stochastic dynamic systems: A frequency domain approach. Computer Methods in Applied Mechanics and Engineering, 338, pp. 412-439. (doi: 10.1016/j.cma.2018.04.025)

Machado, M.R., Adhikari, S., Dos Santos, J.M.C. (2018) Spectral element-based method for a one-dimensional damaged structure with distributed random properties. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, (doi: 10.1007/s40430-018-1330-2)

Karličić, D., Cajić, M., Adhikari, S. (2018) Dynamic stability of a nonlinear multiple-nanobeam system. Nonlinear Dynamics, 93, pp. 1495-1517. (doi: 10.1007/s11071-018-4273-3)

Jeong, S., Kim, Y., Park, H., Kim, J. (2018) Effects of rainfall infiltration and hysteresis on the settlement of shallow foundations in unsaturated soil. Environmental Earth Sciences, 77, (doi: 10.1007/s12665-018-7690-1)

Zhang, D.P., Lei, Y.J., Adhikari, S. (2018) Flexoelectric effect on vibration responses of piezoelectric nanobeams embedded in viscoelastic medium based on nonlocal elasticity theory. Acta Mechanica, 229, pp. 2379-2392. (doi: 10.1007/s00707-018-2116-4)

Rahardjo, H., Thang, N. C., Kim, Y., Leong, E.-C. (2018) Unsaturated elasto-plastic constitutive equations for compacted kaolin under consolidated drained and shearing-infiltration conditions. Soils and Foundations, 58, pp. 534-546. (doi: 10.1016/j.sandf.2018.02.019)

Madinei, H., Haddad Khodaparast, H., Friswell, M.I., Adhikari, S. (2018) Minimising the effects of manufacturing uncertainties in MEMS Energy harvesters. Energy, 149, pp. 990-999. (doi: 10.1016/j.energy.2018.02.048)

Kim, Y., Rahardjo, H., Satyanaga, A. (2018) Numerical simulations of triaxial shearing-infiltration tests. Soils and Foundations, 58, pp. 398-411. (doi: 10.1016/j.sandf.2018.02.009)

Machado, M.R., Adhikari, S., Dos Santos, J.M.C., Arruda, J.R.F. (2018) Estimation of beam material random field properties via sensitivity-based model updating using experimental frequency response functions. Mechanical Systems and Signal Processing, 102, pp. 180-197. (doi: 10.1016/j.ymssp.2017.08.039)

Grassl, P., Johansson, M., Leppänen, J. (2018) On the numerical modelling of bond for the failure analysis of reinforced concrete. Engineering Fracture Mechanics, 189, pp. 13-26. (doi: 10.1016/j.engfracmech.2017.10.008)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2018) Probing the shear modulus of two-dimensional multiplanar nanostructures and heterostructures. Nanoscale, 10, pp. 5280-5294. (doi: 10.1039/c7nr07261a)

Grassl, P., Antonelli, A. (2018) Network Modelling of Fracture Processes in Fibre-Reinforced Quasi-Brittle Materials.

Athanasiadis, I., Wheeler, S. J., Grassl, P. (2018) Hydro-mechanical network modelling of particulate composites. International Journal of Solids and Structures, 130-31, pp. 49-60. (doi: 10.1016/j.ijsolstr.2017.10.017)

Dey, S., Mukhopadhyay, T., Sahu, S.K., Adhikari, S. (2018) Stochastic dynamic stability analysis of composite curved panels subjected to non-uniform partial edge loading. European Journal of Mechanics - A/Solids, 67, pp. 108-122. (doi: 10.1016/j.euromechsol.2017.09.005)

Adhikari, S., Friswell, M.I. (2018) A Stochastic Multidomain Approach for Mid-frequency Vibration Problems.

Malaji, P.V., Doddi, S., Friswell, M.I., Adhikari, S. (2018) Analysis of Pendulums Coupled by Torsional Springs for Energy Harvesting. (doi: 10.1051/matecconf/201821105008)

Pryse, S.E., Adhikari, S., Kundu, A. (2018) Projection Methods for Stochastic Structural Dynamics. (doi: 10.1051/matecconf/201821101003)

Maneshi, M.A., Ghavanloo, E., Fazelzadeh, S.A., Friswell, M.I., Adhikari, S. (2018) Semi-analytical Solution for Postbuckling Behavior of Highly Deformable Nanobeams.

Khodaparast, H. H., Govers, Y., Dayyani, I., Adhikari, S., Link, M., Friswell, M.I., Mottershead, J.E., Sienz, J. (2017) Fuzzy finite element model updating of the DLR AIRMOD test structure. Applied Mathematical Modelling, 52, pp. 512-526. (doi: 10.1016/j.apm.2017.08.001)

Kim, J., Kim, Y., Jeong, S., Hong, M. (2017) Rainfall-induced landslides by deficit field matric suction in unsaturated soil slopes. Environmental Earth Sciences, 76, (doi: 10.1007/s12665-017-7127-2)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2017) Effective mechanical properties of multilayer nano-heterostructures. Scientific Reports, 7, (doi: 10.1038/s41598-017-15664-3)

Scarth, C., Adhikari, S. (2017) Modeling spatially varying uncertainty in composite structures using lamination parameters. AIAA Journal, 55, pp. 3951-3965. (doi: 10.2514/1.J055705)

Pryse, S.E., Adhikari, S. (2017) Stochastic finite element response analysis using random eigenfunction expansion. Computers and Structures, 192, pp. 1-15. (doi: 10.1016/j.compstruc.2017.06.014)

Mukhopadhyay, T., Adhikari, S. (2017) Effective in-plane elastic moduli of quasi-random spatially irregular hexagonal lattices. International Journal of Engineering Science, 119, pp. 142-179. (doi: 10.1016/j.ijengsci.2017.06.004)

Jacquelin, E., Dessombz, O., Sinou, J.-J., Adhikari, S., Friswell, M.I. (2017) Polynomial chaos-based extended Padé expansion in structural dynamics. International Journal for Numerical Methods in Engineering, 111, pp. 1170-1191. (doi: 10.1002/nme.5497)

Chakraborty, S., Chatterjee, T., Chowdhury, R., Adhikari, S. (2017) Robust design optimization for crashworthiness of vehicle side impact. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 3, (doi: 10.1115/1.4035439)

Kim, Y., Jeong, S. (2017) Modeling of shallow landslides in an unsaturated soil slope using a coupled model. Geomechanics and Engineering, 13, pp. 353-370. (doi: 10.12989/gae.2017.13.2.353)

Kim, Y., Park, H., Jeong, S. (2017) Settlement behavior of shallow foundations in unsaturated soils under rainfall. Sustainability, 9, (doi: 10.3390/su9081417)

Dey, S., Mukhopadhyay, T., Adhikari, S. (2017) Metamodel based high-fidelity stochastic analysis of composite laminates: a concise review with critical comparative assessment. Composite Structures, 171, pp. 227-250. (doi: 10.1016/j.compstruct.2017.01.061)

Mukhopadhyay, T., Chakraborty, S., Dey, S., Adhikari, S., Chowdhury, R. (2017) A critical assessment of Kriging model variants for high-fidelity uncertainty quantification in dynamics of composite shells. Archives of Computational Methods in Engineering, 24, pp. 495-518. (doi: 10.1007/s11831-016-9178-z)

Chakraborty, S., Chatterjee, T., Chowdhury, R., Adhikari, S. (2017) A surrogate based multi-fidelity approach for robust design optimization. Applied Mathematical Modelling, 47, pp. 726-744. (doi: 10.1016/j.apm.2017.03.040)

Jeong, S., Lee, K., Kim, J., Kim, Y. (2017) Analysis of rainfall-induced landslide on unsaturated soil slopes. Sustainability, 9, (doi: 10.3390/su9071280)

Metya, S., Mukhopadhyay, T., Adhikari, S., Bhattacharya, G. (2017) Efficient system reliability analysis of earth slopes based on support vector machine regression model. Academic Press

Boulkaibet, I., Mthembu, L., Marwala, T., Friswell, M.I., Adhikari, S. (2017) Finite element model updating using Hamiltonian Monte Carlo techniques. Inverse Problems in Science and Engineering, 25, pp. 1042-1070. (doi: 10.1080/17415977.2016.1215446)

Metya, S., Mukhopadhyay, T., Adhikari, S., Bhattacharya, G. (2017) System reliability analysis of soil slopes with general slip surfaces using multivariate adaptive regression splines. Computers and Geotechnics, 87, pp. 212-228. (doi: 10.1016/j.compgeo.2017.02.017)

Karličić, D., Cajić, M., Adhikari, S., Kozić, P., Murmu, T. (2017) Vibrating nonlocal multi-nanoplate system under inplane magnetic field. European Journal of Mechanics - A/Solids, 64, pp. 29-45. (doi: 10.1016/j.euromechsol.2017.01.013)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2017) Effective elastic properties of two dimensional multiplanar hexagonal nanostructures. 2D Materials, 4, (doi: 10.1088/2053-1583/aa551c)

Martínez-Ayuso, G., Friswell, M. I., Adhikari, S., Khodaparast, H. H., Berger, H. (2017) Homogenization of porous piezoelectric materials. International Journal of Solids and Structures, 113-14, pp. 218-229. (doi: 10.1016/j.ijsolstr.2017.03.003)

Machado, M. R., Adhikari, S., Dos Santos, J. M. C. (2017) A spectral approach for damage quantification in stochastic dynamic systems. Mechanical Systems and Signal Processing, 88, pp. 253-273. (doi: 10.1016/j.ymssp.2016.11.018)

Fahy, C., Wheeler, S. J., Gallipoli, D., Grassl, P. (2017) Corrosion induced cracking modelled by a coupled transport-structural approach. Cement and Concrete Research, 94, pp. 24-35. (doi: 10.1016/j.cemconres.2017.01.007)

Khodaparast, H. H., Madinei, H., Friswell, M. I., Adhikari, S., Coggon, S., Cooper, J. E. (2017) An extended harmonic balance method based on incremental nonlinear control parameters. Mechanical Systems and Signal Processing, 85, pp. 716-729. (doi: 10.1016/j.ymssp.2016.09.008)

Mukhopadhyay, T., Adhikari, S. (2017) Stochastic mechanics of metamaterials. Composite Structures, 162, pp. 85-97. (doi: 10.1016/j.compstruct.2016.11.080)

Naskar, S., Mukhopadhyay, T., Sriramula, S., Adhikari, S. (2017) Stochastic natural frequency analysis of damaged thin-walled laminated composite beams with uncertainty in micromechanical properties. Composite Structures, 160, pp. 312-334. (doi: 10.1016/j.compstruct.2016.10.035)

Martínez-Ayuso, G., Friswell, M. I., Adhikari, S., Khodaparast, H. H., Featherston, C. A. (2017) Energy harvesting using porous piezoelectric beam with impacts. Procedia Engineering, 199, pp. 3468-3473. (doi: 10.1016/j.proeng.2017.09.454)

Arora, V., Friswell, M., Adhikari, S. (2017) FRF-based Probabilistic Model Updating in Structural Dynamics for Uncertainty Identification and Quantification.

Adhikari, S. (2017) Inertial mass sensing with low Q-factor vibrating microcantilevers. Journal of Applied Physics, 122, (doi: 10.1063/1.4993678)

Madinei, H., Khodaparast, H.H., Friswell, M.I., Adhikari, S., Shaw, A.D. (2017) Nonlinear MEMS Piezoelectric Harvesters in the presence of geometric and structural variabilities. Procedia Engineering, 199, pp. 3456-3461. (doi: 10.1016/j.proeng.2017.09.451)

Jacquelin, E., Dessombz, O., Sinou, J.-J., Adhikari, S., Friswell, M.I. (2017) Steady-state response of a random dynamical system described with Padé approximants and random eigenmodes. Procedia Engineering, 199, pp. 1104-1109. (doi: 10.1016/j.proeng.2017.09.212)